Storing The Battery - Toro 412690000 Operator's Manual

Storing the Battery

1. Fully charge the battery.
2. Let the battery rest for 24 hours, then check the
battery voltage.
Note:
If the battery voltage is below 12.6 V,
repeat steps 1 and 2.
3. Disconnect the cables from the battery.
4. Check the voltage periodically to ensure that the
voltage is 12.4 V or higher.
Note:
If the battery voltage is below 12.4 V,
repeat steps 1 and 2.
Battery Storage Tips
If you are storing the battery outside the machine, do
the following:
•
Store the battery in a cool, dry area in an upright
position.
•
Do not stack batteries directly on top of each other,
unless they are in cartons.
•
Do not stack more than 3 batteries (only 2 if the
battery type is commercial).
•
Test a wet battery every 4 to 6 months and charge
it, if necessary.
•
Always test and charge the battery before
installation.
50