HDD Protection Utility
The HDD Protection utility controls your computer's hard
disk drive (HDD) protection feature, which parks the HDD
whenever motion is detected on the computer. Using this
utility, you can enable or disable hard disk drive (HDD)
protection, and set the motion detector's sensitivity level for
AC power and battery power operation.
To use the HDD Protection utility:
Click Start, All Programs, Toshiba, Utilities, and then
1
click HDD Protection, or click the HDD Protection
icon in the Protect & Fix tab of
The HDD Protection Properties window appears.
(Sample Image) HDD Protection Properties window
Select ON to enable HDD protection, or select OFF to
2
disable HDD protection.
3
Set the battery and AC power detection levels as desired.
Click OK.
4
TOSHIBA Utilities
HDD Protection Utility
TOSHIBA
161
Assist.