Button Operations - Beamz 152.918 Manual

1. Laser Aperture
4. Power indicator: Red
7. Function Display LCD
10. Interlock
13. ON/OFF switch

Button Operations

MODE DOWN
As the above pic,
MODE for menu, ENTER for confirmation, UP and DOWN to change operating mode, parameter or
DMX address.
When laser is powered on, LCD monitor on rear panel shows the current operating standalone mode
or DMX address of DMX mode. Press MODE to choose following modes as follows:
Prg mode: Program file selected mode, LCD first line shows "Prg mode", and second line shows the
PRG file name. Press ENTER to choose different folders, and press UP or DOWN to
choose different PRG files in current folder.
ILDA MODE: ILDA file selected mode. LCD first line shows "ILDA mode", and second line
shows .ild file name. Press ENTER to choose different folders, and press UP or DOWN
to choose different .ild files in current folder.
Audio mode: Sound activation mode, press UP or DOWN to set the sound sensitivity.
Auto mode: Auto-running mode
DMX mode: DMX512 mode
Phasic set: Change X/Y
After choosing the mode, press "ENTER" for confirmation. Holding press "ENTER" for more than one
second, it will save the current selected mode. It will play the saving mode when it starts next time.
NOTICE
Before inserting SD card, pls turn OFF the machine, and then restart it
2. Sound active microphone
5. DMX linking jack
8. Sound sensitivity knob
11. SD card slot
14. Power Jack
UP ENTER
3. Sound active indicator: Blue
6. DB25 ILDA interface
9. Pattern size adjustable knob
12. Key lock