Table of Contents
Advertisement
Troubleshooting
PROBLEM
Slide fails to drop into projection
position
Uneven illumination on screen
Projector won't cycle to next slide
27
All manuals and user guides at all-guides.com
CAUSE
Tray base plate not properly indexed
Tray not properly positioned on
projector
Slide mount warped or frayed at
corners slide.
Projector not level or tilted too high
Projection lamp not fully seated
Condenser lens not installed or not
positioned properly in mount
Slide mount not seated properly in
projector gate
Tray not properly positioned
Slide or foreign object stuck in gate
CORRECTION
Align the index hole and index
notch.
Reposition tray on projector.
Straighten mount or remount
slide.
Set projector on a stand equal
with center of screen.
Check lamp.
Check condenser lens.
Check slide position and slide-
mount condition.
Reposition tray.
See "Clearing a Gate Jam" on
page 17.
KODAK CAROUSEL® Slide Projector
Advertisement
Table of Contents
