Using The Wireless Controller - Sony CECH-4201B Safety And Support

unplug the system. Do not put the disc back in until the moisture
evaporates (this may take several hours). If the system still does
not operate properly, contact SCEA Consumer Services
( back cover).
Protecting the lens and the surrounding area
Do not touch the lens located inside the disc cover or any of the
parts around the lens. To help protect the lens from dust, keep
the disc cover closed except when inserting or removing discs.
If the lens is dirty, or if you touch the parts around the lens, the
system may not operate properly.
10

Using the Wireless Controller

If you disconnect the USB cable, you can use the controller
wirelessly. To use it wirelessly, the controller's battery must be
charged. You can check the battery level on the screen by
pressing the PS button for at least one second.
Pairing the controller with a PS3™ system
When using the controller for the first time, you must first pair the
PS3™ system and the controller. To pair the devices, connect
the controller and the system using a USB cable and press the
PS button.
When using two or more controllers, each controller must be
paired with the PS3™ system separately.
Hint
You can connect up to seven controllers at one time.
Charging the battery
To charge the controller battery, connect the controller to the
system using a USB cable while the system is turned on.
Hint
Charge in an environment where the temperature range is between
10° C - 30° C (50°F - 86°F). Charging may not be as effective when
performed in other environments.