Biostar P4VTG Manual page 22

execute a series of testing until system fail. Then system will
do fail-safe reboot by using Watchdog function. After reboot,
the [WarpSpeeder™] utility will restore to the hardware
default setting or load the verified best and stable frequency
according to the Recovery Dialog's setting.
d. "Verify button": User can click this button and
[WarpSpeeder™] will proceed a testing for current frequency.
If the testing is ok, then the current frequency will be saved
into system registry. If the testing fail, system will do a
fail-safe rebooting. After reboot, the [WarpSpeeder™] utility
will restore to the hardware default setting or load the verified
best and stable frequency according to the Recovery
Dialog's setting.
Note:
Because the testing programs, inv oked in Auto-ov erclock and Verify,
include DirectDraw, Direct3D and DirectShow tests, the DirectX 8.1
or newer runtime library is required. And please make sure your
display card's color depth is High color (16 bit) or True color( 24/32
bit ) that is required for Direct3D rendering.
5. Hardware Monitor Panel
Click the Hardware Monitor button in Main Panel, the button will
be highlighted and the Hardware Monitor panel will slide out to
left as the following figure.
In this panel, you can get the real-time status information of your
system. The information will be refreshed every 1 second.
6. About Panel
Click the "about" button in Main Panel, the button will be
highlighted and the About Panel will slide out to up as the
following figure.
In this panel, you can get model name and detail information in
P 4 V T G
P 4 V T G
22