Advertisement
Available languages
Available languages
– Impairment of hearing.
– Risk of squeezing fingers when changing
accessories.
– Health hazards caused by breathing dust
developed when working in wood.
– Risk of personal injury due to flying particles.
– Risk of personal injury due to prolonged use.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Date Code Position (fi g. A)
The Date Code (10), which also includes the year of
manufacture, is printed into the housing.
Example:
2009 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Rotary drill
1 Side handle
1 Spade handle
1 Instruction manual
1 Exploded drawing
● Check for damage to the tool, parts or
accessories which may have occurred during
transport.
● Take the time to thoroughly read and understand
this manual prior to operation.
Description (fi g. A)
WARNING: Never modify the power tool
or any part of it. Damage or personal
injury could result.
1 Variable speed switch
2 Lock-on button
3 Forward/reverse slider
4 Keyed chuck
5 Side handle
6 Spade handle
7 Sleeve
8 Chuck key
9 Main handle
Intended use
Your professional rotary drill D21520 has been
designed for heavy duty rotary drilling, thread
tapping and mixing.
DO NOT use this tool under wet conditions or in
presence of fl ammable liquids or gases.
These drills are professional power tools.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced
operators use this tool.
Electrical Safety
The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Your D
WALT tool is double insulated in
E
accordance with EN 60745; therefore no
earth wire is required.
WARNING: 115 V units have to be
operated via a failsafe isolating
transformer with an earth screen between
the primary and secondary winding.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
D
WALT service organisation.
E
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fi tted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in
the plug.
• Connect the blue lead to the neutral terminal.
WARNING: No connection is to be
made to the earth terminal.
Follow the fi tting instructions supplied with good
quality plugs. Recommended fuse: 13 A
E N G L I S H
21
Advertisement
