ASROCK Z790 PG SONIC User Manual page 51

Z790 PG SONIC
Step 3
Before installing a M.2 SSD
2
module, please loosen the screws to
remove the M.2 heatsink.
*Please remove the protective films
on the bottom side of the M.2
heatsink before you install a M.2
SSD module.
Step 4
Move the standoff based on the
module type and length. The
standoff is placed at the nut location
B by default. Skip Step 4 and 5 if
your M.2 SSD module is Type 2280.
Step 5
Peel off the yellow protective film on
the nut to be used. Hand tighten the
standoff into the desired nut location
on the motherboard.
Step 6
Align and gently insert the M.2 SSD
module into the M.2 slot. Please
be aware that the M.2 SSD module
only fits in one orientation.
B A
20
o
B A
47