Step 3
2
Before installing a M.2 SSD
module, please loosen the screws to
remove the M.2 heatsink.
*Please remove the protective films
on the bottom side of the M.2
heatsink before you install a M.2
SSD module.
Step 4
Move the standoff based on the
module type and length. Peel off the
yellow protective film on the nut to
be used. Hand tighten the standoff
into the desired nut location on the
motherboard.
Step 5
Align and gently insert the M.2 SSD
module into the M.2 slot. Please be
aware that the M.2 SSD module only
fits in one orientation.
A
A
20
o
42