Atag VA9411TT/A01 Quick Manual

Short and precise:
en
everything your dishwasher
needs...
However, before using the
device for the first time, read
the Installation and Instruction
Manual thoroughly!
Fill in salt
Fill in rinse aid
Fill in cleaning product
Open mains water tap
Switch on by pressing main switch d (approx. 2 seconds)
Select programme
In the Main Menu by pressing –/+
d –
Menu <
Auto Wash
OK
Start programme
Here goes ...
Press Start button.
Switch off the device
Open the door when the buzzer has sounded 5 times
(programme stop). "Ready" is briefly displayed, the
appliance automatically switches off after 5 seconds.
Interesting Facts For The Operation
Before first use
– Select the display language (see instruction manual)
– Fill in salt and rinse aid (see below)
– Set Softening System (see instruction manual)
This dishwasher is equipped with touch buttons.
A gentle touch starts the function. A signal will sound on
setting the buttons.
Not required if softening system set to "0". Required if "Refill salt" is displayed
Required if "Refill rinse aid" is displayed.
Little dirt, little cleaning agent
Switch on the device
Fast, Eco or Power ...
Programme Overview
> +
Start
The programme data are laboratory read-outs
according to European Standard EN 50242.
In practice, deviations are possible.
Options/Basic Settings (Menu)
Select and store: Menu/OK; Set: –/+.
All done ...
1. Timer programming
2. Reduce Time
3. Drying Level
4. Buzzer Volume
5. Adding Rinse Aid
The display gives optical character information on the programmes,
options, and settings as well as actions available.
– d Main switch
– Menu/OK
– and +
– Start
The luminous arrows indicate whether you are able to select among other options using – or +.
Only before using
Unscrew
the dishwasher
the lid.
for the first time
pour approx. 1 l /
2 pt water into the
salt opening.
Press the
marking,
Lift the
lid
Warning,
combination
products are not
suitable for all
programmes,
follow manufac-
turer's instructions.
Duration: hs/mins
Energy Consumption: kWh
Water Consumption: litres
6. Water Hardness
7. Language
8. Standard Programmes
Menu – < >
d
Auto Wash
OK
: Switch on the device
: Select options, store changed value
: Select programmes and settings
: Start programme.
Pour in max.
1.5 kg / 3 lb 5 oz
salt (never deter-
gent!)
Pour in
the rinsing
agent
Pour in the
cleaning agent
Prerinse Quick
Only Wash
0:19 0:30 1:20-1:40
0,05 0,70 0,70-0,90
4 10
Standard Programmes
Extra
Duration: hs/mins 2:20
Energy Consumption: kWh 1,05
Water consumption in litres
15
+
Start
Screw on the
lid. Switch on
dishwasher
immediately.
Close the
lid.
CLICK
Push the lid
too, press.
PLOP
Auto Auto Wash Auto Super
Delicate Wash
Wash
1:25-2:20 1:50-2:20
1,00-1,60 1,40-1,70
10-18 9-19 12-20
Eco Eco Normal
50 45 45
2:20 2:20 2:15
1,05 1,05 0,61
12 10 13,6