Gigabyte R283-ZF1-AAL1 User Manual page 71

Parameter
PCI Bus Driver Version
U2_P0_P_#_Lanes Configuration
U2_P1_P_#_Lanes Configuration
U2_P0_P_#_I/O ROM
U2_P1_P_#_I/O ROM
U2_P0_P_#_Link Speed
U2_P1_P_#_Link Speed
PCI Devices Common Settings
Above 4G Decoding
SR-IOV Support
Relaxed Ordering
(Note1) This section is dependent on the available PCIe Slot.
(Note2) This section is dependent on the available OCP connector.
Description
Displays the PCI Bus Driver version information.
Change the PCIe lanes.
(Note1)
Options available: Disabled, Auto, x16, x8x8, x8x4x4, x4x4x8,
(Note1)
x4x4x4x4. Default setting is Auto.
When enabled, this setting will initialize the device expansion ROM
(Note1)
for the related PCI-E slot.
(Note1)
Options available: Disabled, Enabled. Default setting is Enabled.
Configure PCIe max link speed.
(Note1)
Options available: Auto, Gen5, Gen4, Gen3, Gen2, Gen1.
(Note1)
Default setting is Auto.
Enable/Disable memory mapped I/O to 4GB or greater address
space (Above 4G Decoding).
Options available: Disabled, Enabled. Default setting is Enabled.
If the system has SR-IOV capable PCIe devices, this item Enable/
Disable Single Root IO Virtualization Support.
Options available: Disabled, Enabled. Default setting is Enabled.
Enable/Disable PCI express device relaxed ordering.
Options available: Disabled, Enabled. Default setting is Enabled.
BIOS Setup
- 72 -