Gigabyte R283-ZF1-AAL1 User Manual page 31

4
7
• Lock the CPU by using a Torx T20 screwdriver to tighten screw.
• When installing the heatsink to CPU, use a Torx T20 screwdriver to tighten 6 captive nuts in
sequence as 1-6.
• The screw tightening torque: 12.5-15.0 kgf-cm.
• To ensure the system operates properly, make sure the heatsink is seated on the processor
firmly.
5
System Hardware Installation
- 31 -
6
2 2
1 1
6 6
3 3
5 5
4 4
8