Gigabyte R283-ZF1-AAL1 User Manual page 120

Parameter
Data Link Feature Cap
CV test
SEV-SNP Support
Allow Compliance
SRIS
Multi Upstream Auto
Speed Change
Multi Auto Speed Change
On Last Rate
PCIE Link Speed
Capability
RTM Margining Support
EQ Bypass To Highest
Rate
Non-PCIe Compliance
Support
PCIE Idle Power Setting
nBif Common Options
Link EQ Present Options
Enable 2 SPC (Gen 4)
Description
Enable/Disable the data link feature capability.
Options available: Enabled, Disabled, Auto. Default setting is Auto.
Enable/Disable the running PCIE CV tool support.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
Enable/Disable the SEV-SNP support.
Options available: Disable, Enable. Default setting is Disable.
When enabled, allows the PCIe RP to enter Polling.Compliance state.
Options available: Auto, Disable, Enable. Default setting is Auto.
Options available: Auto, Disable, Enable. Default setting is Auto.
Defines the setting of this feature for all PCIe devices.
Options available: Disabled, Enabled, Auto. Default setting is Auto.
Options available: Disable, Enable, Auto. Default setting is Auto.
Options available: Maximum speed, Gen1, Gen2, Gen3, Gen4, Gen5, Auto.
Default setting is Auto.
Options available: Disable, Enable, Auto. Default setting is Auto.
Options available: Disable, Enable, Auto. Default setting is Auto.
Options available: Disable, Enable, Auto. Default setting is Auto.
Options available: Optimized for Latency, Optimized for Perf/Power.
Default setting is Optimized for Perf/Power.
Press [Enter] for configuration of advanced items.
Press [Enter] for configuration of advanced items.
Enable this settings to use 2 symbols per clock for devices at Gen 4 peed.
Options available: Enable, Auto. Default setting is Auto.
BIOS Setup
- 121 -