Lcd Module Disassembly Process; Lcd Module Disassembly Flowchart - HP Aspire one Series Service Manual

LCD Module Disassembly Process

IMPORTANT: Cable paths and positioning may not represent the actual model. During the removal and
replacement of components, ensure all available cable channels and clips are used and that the cables are
replaced in the same position.
NOTE: These disassembly procedures feature the 3G model only, therefore there are four antenna cables (white,
black, yellow, and blue) addressed during the procedure. If 3G is not supported, only the WLAN antennas (white
and black) need to be removed.

LCD Module Disassembly Flowchart

LCD FPC Cable
Screw List
Step
LCD Bezel
LCD Panel
LCD Brackets
Chapter 3
All manuals and user guides at all-guides.com
Panel from Main
Remove
Microphone
Board
Remove Remove
LCD Brackets
Screw Quantity
M2*5 6
M2*3 2
M2*3 4
Remove LCD
Unit before
proceeding
Remove
LCD Bezel
Remove Remove
LCD Panel Camera Module
Remove
WLAN Antennas
Part No.
86.S0207.002
Remove
3G Antennas
89