Location Of Controls And Components; Understanding The Camera Indicators - Panasonic BL-C230A Service Manual

5 Location of Controls and Components

5.1.

Understanding the Camera Indicators

The camera's indicators light as follows according to the status of the camera. Understanding how and when the indicators light can
help you troubleshoot problems with the camera.
Camera Status or Operation
Normal Operation
When power is turned on (camera is starting up)
Obtaining IP address via DHCP
LAN cable not connected or no LAN connection
Automatic Setup
Updating firmware
Factory reset (by software or by pressing the FACTORY
DEFAULT RESET button)
UPnP™ port forwarding error
Privacy mode activated
Camera failure
Camera Status or Operation
No TVs are registered to the camera
The camera can communicate with at least one TV in its device
list
The camera cannot communicate with any of the TVs in its
device list
The camera is in registration mode
The POWER indicator
Indicator Color and Pattern
Green
Orange→Flashing orange
Flashing green
Orange
Flashing green→Green
Flashing orange
Flashing orange→Off→(The camera restarts)
Flashing orange (2-second intervals)
Red
Flashing red
The AV LINK indicator
Indicator Color and Pattern
Off
Green
Orange
Flashing orange
17
BL-C230A