Advertisement
NAME
M1A
M1B
Connect motor M1.
VCC
GND
M2A
M2B
Connect motor M2.
GND
+5V
SLEEP 1
Motor M1 Enable (Motor Free). Active high pin (+5V).
DIR1
Active high pin. Use to change the direction of motor M1.
PWM1
PWM2
DIR2
Active high pin. Use to change the direction of motor M2.
SLEEP 2
Motor M2 Enable (Motor Free). Active high pin (+5V).
Connect positive of power supply. (6 – 30 V)
Connect GND of power supply.
Connect to Gnd of microcontroller
through switch from +5V pin or microcontroller
give through switch from +5V pin or microcontroller
PWM input for motor M1.
PWM input for motor M2.
give through switch from +5V pin or microcontroller
through switch from +5V pin or microcontroller
https://www.robokits.co.in/
FUNCTION
Connect motor M1.
(Connect in reverse to change direction.)
Connect motor M2.
(Connect in reverse to change direction.)
+5V output.
(Can give
pins.)
(Can
pins.)
(Can
pins.)
(Can give
pins.)
7 |
P a g e
Advertisement
