Datanet-30 To Datanet-30; Datanet-30 Peripheral Equipment; Edp Center - GE DATANET-30 System Manual

DATANET-30 to DATANET-30
When one DATANET-30 is used as backup for another DATANET-30, or when it is otherwise
necessary for one DATANET-30 to communicate with another, the following equipment is
available:
Local
Processor Interrupt Unit
Dual Access DSU Controller
Dual Access Tape Controller
Remote
Word Buffer Unit
Telpak A Buffer
DATANET-30 Peripheral Equipment
Once the real time data is captured from the communication line by the DATANET-30, the data
must be stored or otherwise processed depending upon the system design. In order for the
DATANET-30 to handle the additional optional requirements of a real time, direct access/data
communications system, the following equipment is available:
Controlled Selector Unit (CSU 931)
Computer Interface Unit (CIU 930/931)
Common Peripheral Channel (CPC 930)
Card Read Unit (CRF 930)
Punch Reader Unit (PRF 930)
RDC 930 Removable Disc Unit
EDP Center
The EDP center can be any one of the three General Electric computer families. In order for
the DATANET-30 to communicate with the EDP center, the following equipment is available:
Computer Interface Unit CIU 930/931
Common Peripheral Channel CPC 930
Dual Access DSU Controller (GE-200 Series Computer)
Dual Access Tape Controller (GE-200 Series Computer)
lIDbYll&\~lE1ic::l ~®------------
-19-