OPERATION
Powering the Unit
Electrical power is provided via a power cord. Internally, power passes through a 2-pole main circuit breaker, which is accessi-
ble inside the main control enclosure.
To turn off power to the unit, unplug the power cord from the wall receptacle.
System Setup
All system operation is performed using the door-mounted touch screen displays. A list of icons is available in Appendix A:
Icons.
Once the system is set up, plug the power cord(s) into the properly sized receptacles.
1.
2.
The door mounted displays will turn on and display the HOME screen, as shown in Figure 9. The current interior
chamber temperature will display.
To initiate system setup, press the SETUP icon
3.
Setup
System Health
Note: All settings may be returned to factory default settings.
Note: Operator privileges or above will be required to make changes to any of the controller settings. User access will return to
View Only if the controller is left unattended for more than 5 minutes.
in the bottom-left corner of the HOME screen.
Figure 9: Home Screen
ULC SERIES INSTRUCTION MANUAL
Technical Service
Unit Information
17