Smeg DF352CS Manual page 31

Istruzioni per l'utente
ADJUSTING THE RINSE AID DISPENSER MODE
The dishwasher must be switched on and the door closed.

Press and hold the program selection button (7),

after approximately 15 seconds the salt light flashes,

press and hold the program selection button (7) until the rinse aid
indicator light flashes.

The program indicator lights (6) will indicate the current setting.

Each press of the program selection button (7) modifies the setting
according to the following table.
After carrying out the adjustment or displaying the current setting, if you
do not touch the button for a few seconds the dishwasher will
automatically exit from adjustment mode and return to the standard
operating mode.
0 – not
dispensed
minimum 2 ml
3 ml
4ml
5ml
maximum 6 ml
Default settings: b4 - 5 ml

The amount of rinse aid must be increased if the washed dishes
appear dull or feature circular stains.

If, on the other hand, the dishes are sticky or have white streaks, it is
necessary to reduce the rinse aid setting.
>
RINSE AID ADJUSTMENT TABLE
All indicator lights off
b0
One indicator light on
b1
Two indicator lights on
b2
Three indicator lights on
b3
Four indicator lights on
b4
Five indicator lights on
b5
31