Advertisement
Installation
2.3 Water supply connection
Preventing the risk of clogging or damage:
if the water pipe is new or has not been used
for a long time, before connecting to the water
supply check that the water is clear and free of
impurities, to prevent damage to the appliance.
The dishwasher must always be connected
to the water system with new hoses; old or
used hoses must never be reused.
CONNECTING TO THE WATER
SUPPLY
Connect the intake hose to a cold
water supply with ¾" gas thread,
inserting the filter A supplied with the
dishwasher. Take care to screw the
hose firmly into place with your
hands
and
then
complete
by
tightening about ¼ of a turn with
pliers.
In dishwashers equipped with the
AQUASTOP device, the filters is
already fitted inside the threaded
ring.
14
Advertisement
Troubleshooting
