Equipment Of Head Guard, Rops, Fops; Provide Signals For Jobs Involving Mul- Tiple Numbers Of Machines; Confirm Direction Of Machine To Be Driven - Hitachi ZX 210W-3 Workshop Manual

EQUIPMENT OF HEAD GUARD, ROPS, FOPS

In case the machine is operated in areas where the possibility
of falling stones or debris exist, equip a head guard, ROPS, or
FOPS according to the potential hazardous conditions. (The
standard cab for this machine corresponds to ROPS and FOPS.)
ROPS: Roll-Over Protective Structure
FOPS: Falling Object Protective Structure
PROVIDE SIGNALS FOR JOBS INVOLVING MUL-
TIPLE NUMBERS OF MACHINES
• For jobs involving multiple numbers of machines, provide
signals commonly known by all personnel involved. Also,
appoint a signal person to coordinate the job site. Make
sure that all personnel obey the signal person's directions.

CONFIRM DIRECTION OF MACHINE TO BE DRIVEN

• Incorrect steering wheel/forward/reverse pedal operation
may result in serious injury death.
• Before driving the machine, confirm the position of the
undercarriage in relation to the operator's position. If the
travel motors are located in front of the cab, the machine
will move in reverse when steering wheel is operated to
the front.
WCJB-E-00(20160219)
SAFETY
018-E01A-0481
017-E01A-0491
SA-10
SA-686
SA-481
SA-092