About The Aegis Secure Key 3Z; Pin Requirements; Battery Note - Apricorn Aegis Secure Key 3z User Manual

About the Aegis Secure Key 3NX
3
2

PIN Requirements

PINs must be a minimum of 7 digits and a maximum of 16 digits. Cannot contain all
sequential numbers (e.g., 01234567, 9876543)and cannot contain all of the same
number (e.g., 1111111, 2222222.)
Important:
DO NOT PRESS ANY BUTTONS WHILE THE
SECURE KEY IS INSERTED INTO A COMPUTER
USB PORT. The resulting downward pressure
exerted can damage the Secure Key's USB
connector and the computer's USB port, causing
both to malfunction. Enter all PINs and command
codes onto the Secure Key's keypad PRIOR to
plugging the device into the USB port for use.
Battery Care Note
Be sure to connect the Aegis Secure Key to a
powered USB port for 60-80 mins to achieve a
full internal battery charge before initial setup.
A pulsing
steady RED
The device will then automatically recharge
every time it's plugged into a powered USB port.
1
To maintain device battery life, fully recharge it
every 4-6 months.
Battery Safety
Use care when handling the Aegis Secure Key.
It contains sensitive electronic components,
including a lithium battery, and can be damaged,
impair functionality, or cause injury if burned,
punctured, crushed, disassembled, or if exposed
to excessive heat or liquid or to environments
having high concentrations of industrial
chemicals.
Never attempt to replace battery yourself—you
may damage the battery, which could cause
overheating and injury.
RED LED indicates it is charging; a
LED indicates charge is complete.
4