Quick Reference Guide - Apricorn Aegis Secure Key 3z User Manual

Quick Reference Guide for
Programming Key Combinations
Standby Mode
• 7+6 = Read-Only On
• 7+9 = Read-Only Off
+1 then hold 0 = Diagnostic Mode
•
User Mode
+ 1 = Enter User PIN (from forced enrollment state)
•
+ 3 = Set Self-Destruct PIN
•
ADMIN Mode
+ 0 = Enter Admin Mode
•
+ 1 = Create User PIN
•
+ 2 = not used
•
+ 3 = Set Self Destruct PIN Admin or User setup
•
+ 4 = Set Minimum PIN length
•
+ 5 = Set Brute Force Attempts
•
+ 6 = Auto Lock
•
+ 7 = Set Recovery PIN
•
+ 8 = 1X Use to Enter Recovery PIN
•
+ 9 = Enter / Change Admin PIN
•
• 7+1 = Turn Lock Override On
• 7+0 = Turn Lock Override Off
• 7+ 4 = Disable / Enable Self-Destruct PIN
• 7+6 = Read-Only On
• 7+9 = Read-Only Off
• 7+8 = Erase User and Self-Destruct PIN's
• 0+1 = Set Forced-Enrollment for User
• 0+3 = Turn On LED Flicker When Entering PIN from Standby
• 0+4 = Turn Off LED Flicker When Entering PIN from Standby