Advertisement
Problem
• Unit will not start.
• Paddle will not
depress.
• Dust is not
being collected.
TROUbLEShOOTING
Possible Cause
• Cord not plugged in.
• Circuit fuse is blown.
• Circuit breaker is tripped.
• Cord or switch is damaged.
• lock on/ lock off slider is in
locked position.
• Sandpaper holes do not align. • Use sandpaper with the
• Dust canister is full.
Possible Solution
• Plug tool into a working outlet.
• Replace circuit fuse.
(If the product repeatedly causes
the circuit fuse to blow, discontinue
use immediately and have it
serviced at a BlACK+DECKER service
center or authorized servicer.)
• Reset circuit breaker. (If the
product repeatedly causes the
circuit breaker to trip, discontinue
use immediately and have it
serviced at a BlACK+DECKER service
center or authorized servicer.)
• Have cord or switch replaced at
BlACK+DECKER Service Center or
Authorized Servicer.
• Slide the lock on/ lock off slider
left to the unlocked position.
appropriate hole configuration.
• Separate dust canister and gently
shake or tap to empty.
7
Learn more about power tools on our website.
Advertisement
