Advertisement
DUST COLLECTION (FIGURE E)
WARNING: Collected sanding dust from
sanding surface coatings (polyurethane,
linseed oil, etc.) can self-ignite in sander
dust bag or elsewhere and cause fire. To
reduce risk, empty bag frequently and
strictly follow sander manual and coating
manufacturer's instructions.
Your sander comes equipped with a cloth
canister (5) to collect the dust generated
while sanding.
• To attach the canister to the sander, line
up the grooves (6) in the canister (5) with
the nubs (7) on the dust port (4). Ensure
the longer side (8) of the canister opening
is on the top side of the port.
• Slide the canister onto the dust port and
turn the canister clockwise to lock it in
place .
• To remove, turn the canister
counterclockwise and slide the canister off.
• To empty the canister, remove it from the
dust port and dump the sanding debris
into an appropriate trash receptacle.
E
MAINTENANCE
Use only mild soap and damp cloth to clean
the tool. Never let any liquid get inside the tool;
never immerse any part of the tool into a liquid.
IMPORTANT: To assure product SAFETY
and RELIABILITY, repairs, maintenance
and adjustment should be performed by
authorized service centers or other qualified
service organizations, always using
identical replacement parts.
ACCESSORIES
WARNING:
The use of any accessory
not recommended for use with this tool
could be hazardous.
8
6
7
6
Advertisement
