Advertisement
VALIANT
ATD
Bearing Maintenance - The Class 6 A . B . E . C . bearings in the Valiant reels are teflon impregnated in the ball bearing race;
thus, no lubrication is needed for these bearings .
NOTE: Do not lubricate the two small weep holes on the bottom of the reel . These holes are for water to drain out of the
reel .
Wash down your Valiant reel with fresh water after each use . We recommend lightly spraying it to prevent water from
Maintenance
being forced inside . If heavy pressure is needed put the reel in the "Full" drag position . Do not completely submerge the
reel into water . Wipe the exterior parts with an anti-corrosion lubricant . Use a good quality reel oil to lubricate all the parts
indicated with the oil* symbol . We recommend Clenzoil Lube .
Periodically, check all exterior screws to make sure they are tight . Screws may loosen over time with boat vibrations .
We recommend yearly maintenance of your Valiant reel with a service professional . Preventative maintenance of your
Valiant reel will keep the internal parts in proper working condition and prolong the life of the reel .
Storage - When storing your Valiant reel, put the reel in "Free Spool" and the clicker in the on position .
Check out the
Accurate YouTube channel
(Accurate Fishing)
for our reel
maintenance videos
Oil
Clicker Button
Oil
Engagement
Lever,
Grease
or Oil
Grease
Torx Screws
Drop of Oil on
Threads of knob
Oil
Oil
8
Advertisement
