GETTING ACQUAINTED Sideplate Preset Drag Lever Clicker Sideplate Main Drag Lever Preset Button Lock Clicker Button High Speed Retrieve Spool Stud Button Five Hex Screws use 3/32 Allen Wrench Low Speed Retrieve Button Preset Support The spool stud for tying the line to the reel can be removed with a phillips screwdriver.
Bearing Maintenance - The Class 5 A.B.E.C. bearings in the ATD are tephlon impregnated in the ball bearing race; MAINTENANCE thus, no lubrication is needed for these bearings. NOTE: Do not lubricate the two small weep holes on the bottom of the reel. These holes are for water to drain out of the reel.
Page 7
Accurate Fishing Products Two Year Limited Warranty ATD Reels How Long Does The Limited Warranty Coverage Last? This limited warranty runs for a period of two (2) years starting WARRANTY from the date that the ATD reel was first purchased by the consumer. Coverage terminates if you sell or otherwise trans- fer the reel.
FEATURES > Patented TwinDrag™ system ™ THE TWINDRAG SYSTEM > Billet 6061 - T6 aluminum > 7 Class-5 ABEC stainless steel ball bearings > Preset lever with lock and alphanumeric scale EVEN DRAG PRESSURE > QuickShift two-speed > Titanium drag friction washers Drag pressure Drag pressure >...
Page 9
To adjust the clicker for more or less intensity, remove the six 3/32 hex screws on the sideplate. Pull the sideplate apart from the frame. You now have access to the clicker mechanism inside the frame. Pull the ring apart for less intensity or push closer together to add intensity.
25% of the line has been removed from a full spool. Begin filling the Platinum TwinDrag Reel by attaching the line securely to the reel spool. With tension applied to the line, fill FILLING the spool to approximately 1/4”...
LINE CAPACITIES GEAR RATIOS LINE CAPACITY SPECTRA LINE CAPACITY MODEL WEIGHT High lbs./line dia. inches/yds. lbs./yds mono top shot • • ATD-6 41 oz. 2.3/1 30/.022/350 50/600 30/100 • • ATD-12 42 oz. 2.3/1 30/.022/550 80/350 40/250 • • ATD-30 47 oz.
Basic operation of your Platinum Twin Drag fishing reel is no different from operating any other fishing reel except for setting OPERATION the lever drag. The most popular drag setting is to set your drag so when the Main Drag Lever is in the strike position it is at approximately 30% of your line strength.