Advertisement
TERN2
Class 5 A . B . E . C . bearings in the Tern2 are Teflon impregnated in the ball bearing race, no lubrication is needed for these
bearings .
Rinse your Tern2 with a fine spray of freshwater with reel in tighten drag position . Do not use heavy spray pressure as it
might force saltwater into reel . Do not completely submerge the reel into water . Wipe the exterior of the reel with a clean,
soft towel . If reel is on rod gently tap bottom of the rod on ground and wind reel quickly to get any excess water out .
Let reel dry out then take drag and loosen it as it still has a light drag, hold spool in position and turn handle around in
full circle a couple times . This will break all parts of reels apart that might have been affected by any salt sitting on it .
Maintenance
Once done you can lubricate reel at tension knob, lever, and Star Drag with a drop or two of reel lube included in box .
You can find a video on Accurate's YouTube channel under reel maintenance if you need any further help .
Periodically check all exterior screws to make sure they are tight .
We recommend yearly maintenance of your Tern2 with a service professional . Preventative maintenance will prolong life
of reel and make sure it is ready to catch the following season .
When storing reel back off drag and store with clicker in on position .
Drop of Oil on
Oil
Threads of knob
Oil
Engagement
Lever,
Grease
or Oil
Grease Torx Screws
10
Advertisement
