PRIXTON RUN FIT EVEREST PRO RF300 Manual page 20

S3
S3
STEP 2
It is recommended to have a second person assist with this step. One person should hold
the Computer Console in place while the other person connects the cables.
Connect the Main Control Cable from the Right Handlebar Support Tube to the
cable that comes from the Computer Console.
Install the Handlebar Bracket onto the Right and Left Handlebar Support Tubes, using two
M8x16 Hexagon Socket Oval Head Bolts (S3).
IMPORTANT: While sliding the Handlebar Bracket onto the Right and Left Handlebar
Support Tubes make sure the cables are installed inside the Right Handlebar
Support Tube and pay attention not to pinch the cables.
NOW PLEASE FULLY TIGHTEN ALL BOLTS INSTALLED IN STEP 1 .
20