Page 2
Dear Customer, Two-Rock Thank you for your purchase of a amplifier from Two-Rock Amplifiers, LLC. As a discerning guitarist, you know the road to great tone begins with great components. Our Classic Design, carefully selected parts and hand-built approach combine to make an extremely versatile instrument.
Front Panel Functions Input Jack- High impedance input to the amplifier. Plug in your instrument here. Treble - Adjusts the high frequency response. At lower settings of this control the tone will be warmer and smoother. As you turn this control up the highs become more prominent and aggressive adding gain to the signal as well.
Page 4
OverDrive Gain - Adjusts the input level (gain) of the lead channel. Although we refer to this as the “overdrive channel” it is actually an additional “cascading” gain stage in the amp’s circuit driven by the Bass, Middle, Treble, Bright, Mid, Deep, Gain, EQ Shift, and Bypass controls. It has been meticulously designed to add a very dynamic and touch responsive overdrive capability to the amplifier.
Be sure to match the impedance of your cabinet with the impedance (output) of the amplifier. Effects Loop – The effects loop on this amplifier is a passive type of loop, see FAQ on two-rock.com Effects Send - Use this jack to send the amplifier’s signal to outboard effects.
FOOTSWITCH Overdrive - Switches the amp into overdrive mode. Boost (Bypass) - Switches the amp into tone boost mode. Tremolo - Switches the tremolo effect on. Fuse Chart All Fuses are 3AG Type 250 Volt, SLO-BLO 100V 120V 220V/230V/240V 50 Watt: 2.5amp 2.5amp 1.6amp...
Page 8
We know your new Two-Rock amplifier will provide many hours of enjoyment and inspiration in the years to come. This manual is a resource for some of your questions. Please contact us with any other questions or comments that you may have.
Page 9
Two-Rock Amplifiers 619 MARTIN AVENUE, SUITE 5 ROHNERT PARK, CA 94928 707-584-8663 www.two-rock.com SERIAL NUMBER: _____________________________...
Need help?
Do you have a question about the Akoya and is the answer not in the manual?
Questions and answers