Rear Panel - Inter-m NCIO-1000 Operation Manual

Rear Panel

Rear Panel
1 2
1. AC INPUT TERMINAL
It is an AC power supply terminal. The power used is AC 120-240V, 50/60Hz. Do not excessively
bend, pull, twist, heat, or cut the power cord. Doing so may damage the cord and cause fire or
electric shock.
2. AC POWER SWITCH
It switch turns the AC power of the device on and off.
3. DC 24V POWER INPUT TERMINAL
It is an emergency spare battery (DC 24V) connection terminal. If an AC power failure occurs, the
device operates with the connected spare battery. When DC 24V power is applied to the device, the
device always operates regardless of the power switch.
4. CONTACT INPUT TERMINAL
It is the terminal for inputting the contact point. Contact input of up to 16 channels can be received.
When each channel becomes short with COM, a contact point is input.
3 4 5
NETWORK GPIO
6 7
8 9
NCIO-1000
10
5