Access Cpe Network - TCL LINKHUB 5CT User Manual

2.3 Access CPE network

You can link your devices to the CPE network using wired or wireless connections as
illustrated below.
Access wired network
To establish a wired network connection, connect the wired device to the LAN port of your
CPE using an Ethernet cable.
Access wireless network
To establish a wireless network connection, select the Wi-Fi name (or the SSID) of the CPE
on your wireless devices, and enter the Wi-Fi password.
NOTE
The Wi-Fi name and the Wi-Fi password can be found on the bottom label of your
CPE.
If your wireless device is WPS-enabled, you can also access the CPE Wi-Fi network through
a WPS connection. Select one of the following options to make a WPS connection.
4