TCL LINKHUB 5CT User Manual page 5

2. 4G network indicator
3. Wi-Fi/WPS indicator
4. Power indicator
5. Micro USB port
6. Nano SIM card slot
7. Reset button
8. Power button
9. WPS button
10. WAN/LAN port
11. LAN port
12. Telephone port (for
HH512LV only)
13. Power connector
NOTE
When the CPE downloads and installs software updates, the power indicator will
blink with a blue light. Do not power off your CPE during this process as it may
cause the device to malfunction.
Solid blue: The signal is good.
Solid yellow: The signal is weak.
Off: The 4G network is not working.
Solid blue: Wi-Fi is enabled.
Blinking blue: WPS connection is available.
Off: Wi-Fi is disabled.
Solid blue: The device is powered on.
Blinking blue: The device is performing firmware update via
FOTA.
Off: The device is powered off.
Dedicated port for debugging.
Insert a nano SIM card in the slot.
Use a paperclip to press the button for 3 seconds to reset the
device.
Press for 3 seconds to power off your device.
Press for 1 second to power on your device.
Press the button for 3 seconds to enable the WPS function.
The WPS function will be automatically disabled if a WPS
connection is not established within 2 minutes.
For connecting with an internet source or wired devices such
as computers or switches.
For connecting with wired devices such as computers or
switches.
Connect a telephone to make or answer calls.
For connecting with the power adapter.
2