Table of Contents
Advertisement
14. Remote and
Accessories
14.1. Bluetooth® On or Off
Pair Accessory
Position the Bluetooth® device within a distance of 5
meters from the display. Read the user manual of the
device for specific information on pairing and on wireless
range. Make sure the Bluetooth® setting on display is
switched on.
Once a Bluetooth® device is paired, you can select it to
play the display sound. When a device is paired, you do
not need to pair it again unless you remove the device.
To pair a Bluetooth® device with the display:
1 - Switch on the Bluetooth® device and place it within
range of the display.
2 - Select Settings > Remote & accessories > Pair
accessory.
3 - Select Search and press OK. Follow the instructions
on screen. You will pair the device with the display and
the display will store the connection. You might need to
unpair a paired device first if the maximum number of
paired devices was reached.
4 - Press (left) repeatedly if necessary, to close the
menu.
Device Operation
To connect or disconnect a Bluetooth® device:
1 - Select Settings > Remote & accessories.
2 - In the list, select a Bluetooth® device.
3 - Select Connect or Disconnect to connect or
disconnect a Bluetooth® device.
4 - Press (left) repeatedly if necessary, to close the
menu.
To rename a Bluetooth® device:
1 - Select Settings > Remote & accessories.
2 - In the list, select a Bluetooth® device.
3 - Select Rename to rename a Bluetooth® device.
4 - Press (left) repeatedly if necessary, to close the
menu.
You can connect or disconnect a wireless Bluetooth®
device. You can also remove a Bluetooth® device further.
If you remove a Bluetooth® device, the device will be
unpaired.
To remove Bluetooth® device:
1 - Select Settings > Remote & accessories.
2 - In the list, select a Bluetooth® device.
3 - Select Forget to remove the Bluetooth® device.
4 - Press (left) repeatedly if necessary, to close the
menu.
To view the information of Bluetooth® device:
1 - Select Settings > Remote & accessories.
2 - In the list, select a Bluetooth® device.
3 - The information of Bluetooth® device is listed on the
bottom.
4 - Press (left) repeatedly if necessary, to close the
menu.
14.2. Remote Control
Pair Remote Control
Pairing or pairing again
When you start the initial display installation, the display
invites you to press the Home + Back key to pair the
remote control. If the pairing with the remote control
was lost, you can pair it again by pressing the Home +
Back key.
Alternatively, go to Settings > Remote &
accessories > Remote control settings > Pair remote
control, then follow the on-screen instructions.
A message appears when the pairing is successful.
Remote Control Info
View the remote control information
Settings > Remote & accessories > Remote
control settings > Remote control info.
You can select Version to check the embedded software
version of remote control or select Battery level to see
current battery percentage.
Update Remote Control Software
Update remote control software
Settings > Remote & accessories > Remote
control settings > Update remote control software.
Check available remote control software for updates. If a
new software update is available for your remote
control, you can start the software update. Please install
45
Advertisement
Table of Contents
