Step 1 Mount The Screen; Step 2 Set Up The Laser Tv - Hisense 100L9H Quick Setup Manual

STEP 1 Mount the Screen

If you purchased a screen from Hisense to include with your Laser TV, then refer to the Screen Installation
Guide that's included in the package.

STEP 2 Set up the Laser TV

To begin setting up the Laser TV, we strongly recommend that TWO people move it from one place to
another because of the weight. Be sure to protect the lens when you handle this device.
1. Now, to get started, we recommend that you connect all cables to
the ports on the back of the Laser TV before you position it. (Audio,
video, Ethernet cables and external devices are not included.)
2. Position the Laser TV so it is parallel with the screen surface.
3. Plug the power cord into a wall outlet.
4. Press the POWER button to turn on the Laser TV.
Power Cord
Wall Outlet
WARNING: Insufficient ventilation space will cause this
device to overheat or become damaged.
• Do not block the air vents or place any object on this device.
• Do not place this device in any narrow, enclosed or poorly
ventilated space.
Laser beam
At a minimum, leave the amount of space shown in the diagram
below for this device to have proper ventilation.
8 in
7
6 in
8 in