Philips 70PUD7408 User Manual page 26

Hide thumbs Also See for 70PUD7408:
Table of Contents

Advertisement

• Energy Saving(HLG)
Other Picture Settings
Settings > Display & Sound > Picture and press OK.
Backlight
Adjust the video backlight intensity.
Brightness
Set the level of brightness of the picture signal.
Note: Setting of brightness much away from reference
value (50) may result lower contrast.
Contrast
Adjust the contrast value of the picture.
Saturation
Adjust the color saturation value of the picture.
HUE
Adjust the hue value of the picture.
Sharpness
Adjust the level of sharpness in fine detail of the picture.
Advanced Settings
Set the advanced picture settings.
• Color Temperature
Set the picture to a preset color temperature or adjust
the setting yourself.
• Motion Styles (Only available for 70" and 75" models)
Motion Styles provides optimized motion setting modes
for different video content. Select one of the motion
Styles (Off, Low, Medium, High) for a different viewing
experience with motion video.
• Dolby Vision Notification
Switch On or Off Dolby Vision notification when Dolby
Vision content begins to play on your TV.
• DNR
Digital Noise Reduction, with image noise reduction
filters to reduce image noise.
• MPEG NR
MPEG Noise Reduction feature to improve the quality of
pictures by reducing noise without compromising picture
resolution.
• Adaptive Luma Control
Dynamic video contrast enhancement to adjust the Luma
level of the picture signal automatically.
• Local Contrast Control
Enhance the contrast level in a local area of the image.
• DI Film Mode
When film content is detected, the TV will analyze and
upgrade it to higher picture quality.
Gamma
Set a nonlinear setting for picture luminance and
contrast. This is a setting intended for expert users.
Game Mode
Switch TV to Game mode for fast response time.
• HDMI Auto Game mode
Enable TV to automatically switch to Game mode when
the source specifies game content.
• PC Mode
Switch TV to PC mode to have the look of the original
picture.
• HDMI RGB Range
Set the RGB range of video to Full, Limit or Auto for
HDMI sources.
Color Tuner
Fine-tune the color setting yourself.
11 Point White Balance Alignment
Customize the white point balance based on the
selected color temperature of the picture.
Reset to Default
Reset the current picture settings to default.
Picture Format
If the picture is not filling the whole screen, if black bars
are showing on the top or bottom or at both sides, you
can adjust the picture to fill the screen completely.
To select one of the basic settings to fill the screen:
Settings > Display & Sound > Screen.
Automatic
Automatically zooms in the picture to fit the screen with
original aspect ratio. No content lost visible.
Full
Automatically enlarges the picture to fill the screen.
Picture distortion is minimal, subtitles remain visible. Not
suitable for PC input. Some extreme picture content can
still show black bars. Picture content aspect ratio may
change.
Wide screen
Stretches the picture to a 16:9 format.
Super zoom
Remove the black bars on the sides of 4:3 broadcasts.
Not recommended for HD or PC.
Original
Provide maximum detail for PC.
4:3
Display the classic 4:3 format.
Movie expand 14:9
26

Advertisement

Table of Contents
loading

This manual is also suitable for:

7408 series70pud7408/43

Table of Contents