Page 1
FT-31 Acorn Fountain Assembly Instructions Fountain Information: • This fountain holds approximately 4 gallons of water. • This fountain uses a small fountain cover: FTNCOV-SM • No rell device or submersible lights are suggested or this ountain. Pump Information: WP450LV - 120 GPH Low Voltage Pump (16 ft. cord length) Tools Required: Bubble Level Screwdriver...
Page 2
FT-31 Acorn Fountain Assembly Instructions Fountain Set-Up: Assembly & Installation - A ountain can be dicult to install without knowing and understanding the steps involved. To ensure your ountain is installed properly, please read our instructions and tips beore you begin. Step 1 - Seek Professional Help: Check i...
Page 3
Maintenance: Pump Care - The ountain relies heavily on the quality o the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is ully submerged at all times to avoid damage. Step 2 - Ensure water level is sufcient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.