Smeg LBW810IT User Manual page 41

CHAPTER -5: PRELIMINARY PREPARATION FOR
LAUNDERING (ADDING DETERGENT INTO MACHINE)
The amount of detergent you will put in your machine will depend on the follow-
ing criteria:
• Your detergent utilization will be based on the degree of contamination of
your laundries. Do not prewash your less stained laundries and put your slight
amount of detergent in the 2nd compartment of the detergent drawer.
• For your much stained laundries, select a programme including prewashing,
and put ¼ of the detergent you will put in the detergent drawer in the 1st com-
partment of the detergent drawer while putting the remaining ¾ of it into 2nd
compartment.
• Use detergents produced for automatic washing machine in your machine.
The amount of detergent you will use for your laundries is printed on the deter-
gent package.
• The higher the degree of hardness of the water the more detergent you will
use.
• The amount of the detergent you will use will increase as the amount of your
laundries increase.
• Put the softener in the softener compartment in the detergent drawer. Do not
exceed the MAX level. Otherwise, softener will flow into washing water through
flushing.
• Softeners with high density are required to be thinned to a degree before be-
ing put in the drawer. Because high-density softener will clog the flush and avoid
the flow of the softener.
• You can use your liquid detergents in all programs without prewashing. For
this, fit liquid detergent level plate in the accessories bag or the liquid detergent
apparatus (*)
into 2nd compartment of the detergent drawer and set the amount of liquid
detergent according to the levels on this plate. Remember to detach the liquid
detergent plate.
(*)Machinery specifications may vary depending on the product purchased.
EN -41-