Logic3 MIP100 JiveBox User Manual

Thank you for purchasing the Logic3 JiveBox for use with iPod, the latest in our long and
established range of speakers. As with all Logic3 products, the JiveBox has been built to the
highest manufacturing standards, to bring you the very latest and advanced technology available.
This product has been designed specifically to work with iPod and has been certified by Logic3 to
meet Apple performance standards
The JiveBox sets a new benchmark in ultra compact audio system performance. The JiveBox is
an ideal solution to listen, recharge and synchronize your iPod and is the worlds first speaker
system to feature a unique ClassHD Amplifier Technology. The JiveBox also allows connectivity
to other audio devices and boasts an array of features including Digital Sound Processing, an
LED Light Bar and a multi-functional Remote Control to make it the complete sound solution.
Setup
1. Connect the Cable from the AC Adaptor to the 'DC IN' connection at the bottom of the
JiveBox
(SEE FIG. D1)
2. Connect the Power Plug Cable from your AC Mains Power Supply to the AC Adaptor
FIG. D2 / FIG. D3)
3. Switch your AC Mains Power Supply to the ON position.
4. A Blue LED will illuminate on the AC Adaptor to indicate there is power to the JiveBox
iPod Connection
5. Remove the Docking Cover to reveal the 30pin Dock Connector.
6. Ensure that the 30pin Dock Connector is aligned vertically before connecting your iPod
(SEE FIG. E2)
7. Connect your iPod onto the 30pin Dock Connector
8. When placed on the Dock Connector, gently push the iPod back to rest and support the
iPod at an angle.
9. Before disconnecting the iPod, gently bring the iPod forward to ensure the dock
connector is at a vertical position.
10. Disconnect the iPod and replace the Docking Cover over the 30pin Dock connection
Power
11. Press the POWER button on the front of the JiveBox or on the remote control to turn
the JiveBox ON / OFF.
12. Please allow at least 4 seconds for the JiveBox to switch ON, when the unit is ready the
LED light bar will illuminate.
13. The iPod will automatically begin to recharge.
14. Use the iPod click wheel to navigate between the iPod menu screens.
15. Use the remote control to control the play/pause, repeat, shuffle, albums & playlists
functions of the iPod wirelessly.
MIP100 JiveBox User Manual
(SEE FIG. E4)
(SEE FIG. E1)
(SEE FIG. E3)
(SEE