Dmx Channel Assignments And Values; Standalone Configuration; Static Mode; Auto Programs - Chauvet Professional STRIKE P38 User Manual

Operation

DMX Channel Assignments and Values

1 Ch 3 Ch 4 Ch 5 Ch 6 Ch 7 Ch Function
1 1 1 1
– – 2 –
– – – –
– – – –
– – – –
– – – –
– 2 3 2
– – – 3
– – – 4
– 3 4 5
*Hold desired dimmer speed value for 3 seconds, then release. This changes the dimmer
speed setting in the menu.

Standalone Configuration

Use standalone configuration to operate the product without a DMX controller.

Static Mode

The Static mode allows for permanent dimmer and strobe presets without a DMX controller.
1. Go to the Static main level.
2. Select Dimmer or Strobe.
3. Select the desired value, from 0–255.

Auto Programs

Auto programs allow for dynamic blinder effects without a DMX controller.
1. Go to the Auto Show main level.
2. Select the desired auto (Auto 1–3).
3. Select the desired speed, from 001–100.
The auto programs cannot be edited.
STRIKE P38 User Manual Rev. 3
1 – Dimmer
2 – Fine Dimmer
– 1 White
– 2 Fine White
– 3 Amber
– 4 Fine Amber
3 – Red Shift
4 5 Strobe
5 6 Auto Program
6 7 Dimmer Speed*
Value Percent/Setting
000  255 0–100%
000  255 0–100%
000  255 0–100%
000  255 0–100%
000  255 0–100%
000  255 0–100%
000 On
001  255 Off
000  010 No function
011  255 Strobe, slow to fast
000  010 No function
011  080 Auto 1, slow to fast
081  160 Auto 2, slow to fast
161  240 Auto 3, slow to fast
241  255 No function
000  051 Current dimmer speed mode
052  101 Dimmer speed mode off (linear dimmer)
202  152 Dimmer speed mode 1 (fastest)
153  203 Dimmer speed mode 2
204  255 Dimmer speed mode 3 (slowest)
10