How To Use - Ledvance SMART+ GLOBE CAMERA TRACE Manual

HOW TO USE

LIGHT SETTINGS
Time settings
• Every detected movement
re-activates the light
Twilight settings
The brightness response thresh-
old (twilight) can be infinitely
varied from approx. 0 – 20lux
Factory settings
• Time setting: 60s
• Twilight setting: 20lux
CAMERA FUNCTION
• The camera films a sequence
when the sensor is triggered
• The filmed sequence is saved
on the memory card or cloud
storage and can be retrieved at
any time
• The recorded data is saved on
the unit's memory card or cloud
storage
• A QR code is generated on the
smartphone or tablet which can
be read by another smartphone
or tablet
• Once the sensor has been
triggered, the user receives
a push notification via the
LEDVANCE App (can be
deactivated)
– Open LEDVANCE App
– Use image display and intercom
system
– Switch between HD and SD
mode possible
– If HD image shows delay,
SD is recommended
– 3 MP camera
– Live view
– Talk from mobile phone to
camera
– Automatic night mode
– Motion sensor with activity
schedule
– Auto record of motions
(SD card required)
7
All functions are selected and used via the LEDVANCE App.
AIMING CAMERA
The camera can be adjusted
(LEDVANCE WIFI APP)
• Up/down 90°
• Left/right 350°
ALARM FUNCTION
– Acoustic alarm signal reacting
on detected movement
– Sensor sensitivity can be
adjusted (low, medium, high)
INSERT SD MEMORY CARD
– Remove cover
– Insert SD memory card
– Fit cover
– Compatible with SD card type
(SD/SDHC/SDXC)
– SD Class recommended
120-160MB/s
– Minimum card capacity 8GB/
Maximum 128GB