Craftsman 11593 Operator's Manual page 9

Fig.7
REPLACEMENT FUSE
See Figure 8.
If the spotlight blows its fuse, you will need to replace it.
Look for replacement fuses where you purchased this
product.
• Remove the battery pack from the spotlight to access
fuse housing.
• Remove the current fuse and discard. Use a pair of
fuse pullers if necessary.
• Use 10 A JAT blade type automotive fuse to replace the
blown fuse.
NOTE: Only use 10 A JAT blade type automotive fuses for
replacement. If second fuse blows, return to authorized
service center for repair. Always ask for replacement fuse
number 019020001013.
CAUTION: Do not use a higher rated fuse other
than the specified amperage. This could cause
damage to the product.
FUSE
GOODFUSE
BLOWNFUSE
Fig. 8
BATTERY PACK REMOVAL AND PREPARATION
FOR RECYCLING
_ WARNING: Upon removal, cover the battery pack's
terminals with heavy-duty adhesive tape. Do not
attempt to destroy or disassemble battery pack
or remove any of its components. Lithium-ion and
nickel-cadmium batteries must be recycled or dis-
posed of properly. Also, never touch both terminals
with metal objects and/or body parts as short circuit
may result. Keep away from children. Failure to
comply with these warnings could result in fire and/
or serious injury.