General Safety Rules; Operation - Craftsman 11593 Operator's Manual

A
WARNING: Do not attempt to modify this product
or create accessories not recommended for use with
this product. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
,&
WARNING: To prevent accidental starting that
could cause serious personal injury, always remove
the battery pack from the product when assembling
parts.
REMOVING THE WARNING LABEL
See Figure 2.
The spotlight has an attached paper warning label on the
lens. Remove this warning label before use as shown in
figure 2.
PULLTABTO
REMOVE
Fig. 2
A
WARNING: Do not allow familiarity with products to
make you careless. Remember that a careless
fraction of a second is sufficient to inflict serious
injury.
A
WARNING: Always wear safety goggles or safety
glasses with side shields when operating products.
Failure to do so could result in objects being thrown
into your eyes, resulting in possible serious injury.
A
WARNING: Do not use any attachments or
accessories not recommended by the manufacturer
of this product. The use of attachments or
accessories not recommended can result in serious
personal injury.
APPLICATIONS
You may use this product for the purposes listed below:
• To illuminate any areas requiring additional light
• To illuminate distant objects
_ WARNING: The lens gets very hot during use. To
reduce the risk of burns, do not touch hot lens. To
reduce the risk of fire, keep away from combustible
materials while in operation.
CAUTION: Operate in a well ventilated area. Do
not block vents. Keep them clear to allow proper
ventilation.
This product will accept DieHardo 19.2 V lithium-ion
battery packs and Craftsman 19.2 V nickel-cadmium
battery packs.
For complete charging and battery instructions, refer to
the Operator's Manual for the battery packs and chargers
listed in the General Safety Rules.
BATTERY PROTECTION FEATURES
DieHardo 19.2 V lithium-ion battery packs are designed
with features that protect the lithium-ion cells and
maximize battery life.
If the tool stops during use, release the trigger to reset
and resume operation. If the tool still does not work, the
battery needs to be recharged.