Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Avantco 360SC40
Summary of Contents for Avantco 360SC40
- Page 1 User Manual Countertop Display Refrigerator & Freezer User’s Manual 08/2020 Countertop Refrigerator Displays 360SC40, 360SC52, 360SC80, 360CSM4HCB Countertop Freezer Displays 360CFM2, 360CFM3, 360CFM2LB Please read the manual thoroughly prior to equipment set-up, operation and maintenance. - 1 -...
- Page 2 User Manual Warning DANGER – RISK OF FIRE OR EXPLOSION. FLAMMABLE REFRIGERANT USED. TO BE REPAIRED ONLY BY TRAINED SERVICE PERSONNEL. DO NOT PUNCTURE REFRIGERANT TUBING. PELIGRO - RIESGO DE INCENDIO O EXPLOSION. REFRIGERANTE INFLAMABLE UTILIZADO. PARA SER REPARADO SOLAMENTE POR PERSONAL DE SERVICIO CALIFICADO. NO PINCHAR LA TUBERÍA REFRIGERANTE.
-
Page 3: Installation
User Manual Installation Please read this manual thoroughly prior to equipment set-up, operation and maintenance. Important!!! Please Read Before Installation • After unboxing, the unit must be kept upright for a minimum of 24 hours in its final installation location before being plugged in. Failure to do so may cause damage to the compressor and will void the warranty. -
Page 4: Defrost System
User Manual Electrical • Please ensure that the required voltage is being supplied at all times. • The unit should be plugged into a grounded and properly-sized electrical outlet with appropriate over-current protection. Please refer to the electrical requirements on the unit’s nameplate. •... -
Page 5: Temperature Controls
User Manual Temperature Controls • Refrigerant LED - Compressor is on • Fan LED - Fan is on • Defrost LED - Defrost cycle is running Functions Adjusting the Temperature for Digital Controls Your new refrigerator or freezer is already factory-set to run at optimum temperatures for food safety and should require no adjustments. -
Page 6: Loading Product
User Manual Operation/Maintenance NOTE: We strongly recommend that any servicing be performed by an authorized service technician. Loading Product • Do not block the air duct/fan at the top of the unit. Maintain a minimum of 4” of clearance between products and the fan at all times. -
Page 7: Troubleshooting
User Manual Trouble Shooting Compressor is Not Running Fuse blown or circuit breaker tripped. Replace fuse or reset circuit breaker. Power cord unplugged. Plug in power cord Thermostat set too high. Set thermostat to lower temperature. Cabinet in defrost cycle. Wait for defrost cycle to finish.
Need help?
Do you have a question about the 360SC40 and is the answer not in the manual?
Questions and answers