Using the headphones
Switching the headphones off
1. Press and hold the on/off button for 2 seconds.
2. You hear the voice prompt "Power off" and the LED flashes red 3x.
The headphones switch off.
1
Hold
2s
Putting the headphones on and adjusting
the headband
For good sound quality and best possible wearing comfort, the head-
band can be adjusted to properly fit your head.
▷
Wear the headphones so that the headband runs over the top of
your head. The markings
can be found on the inside of the headband.
▷
Move the ear cups up or down the headband slider until:
– your ears are comfortably covered by the ear pads,
– you feel even, gentle pressure around your ears,
– a snug fit of the headband on the head is ensured.
For optimal sound quality, the ear pads must completely surround
your ears.
Left
L
Right
R
2
R
for the right side and
"Power off"
L
for the left side
HD 350BT | 17