Download Print this page

Troubleshooting; Specifications - Clover HDC041 Instruction Manual

3d-dnr day/night miniature color camera

Advertisement

Note:
▪ Apply DC12V 250 mA regulated power supply (not included).
▪ To avoid fire or shock hazard, use a UL listed power supply.
TROUBLE SHOOTING
If the camera does not function properly, check the following points before contacting the
service center.
Troubles
No video
The image on the screen is dark
The image on the screen is dim
The camera is not working properly, and
the surface of the camera case is hot
The contrast on the screen is too weak
The image on the screen flickers
Picture rolls and jumps, scrambled
picture
Picture smaller than screen

SPECIFICATIONS

• Image sensor
• Total pixels
• Effective Pixels
• Scanning system
• O.S.D
• Backlight
• Resolution
• S/N (Y signal)
Remedies
Check the AC adapter and video cable
between the camera and a monitor
Check the brightness control on the
monitor
Check if the lens is stained. If dirty,
clean it with soft and clean cloth
Check if you have connected the
provided AC adapter
Adjust the contrast feature of the
monitor. If the camera is exposed under
too strong light, change the position
Does the camera face to directly to the
sunlight or fluorescent light? Change the
camera position
Improper V-hold control. Setting on your
monitor
House current may be too low
1/3" SONY Super HAD CCD
811(H) x 508(V)
768(H) x 494(V)
2:1 Interlace
Available
Off / HSBLC / BLC selectable
550TV Lines(color),600TV Lines(B/W)
52dB (AGC Off, Weight On)

Advertisement

loading