Electrolux EWT1174M7WA User Manual page 15

Note:
Compare this with Regular rinse
where much more water is used.
Regular rinse, water enters the
machine filling up to the wash water
level selected. The washer agitates
and finally empties the rinse water
through the drain hose.
Extra rinse, this is special option for
those people who suffer from
allergies, this extra rinse will provide
3 rinses to ensure all detergent
residue has been removed.
Eco and Fast rinse is not designed to
be used with fabric softener.
Select Regular rinse if you are going
to use fabric softener.
Regular rinse ensures the fabric
softener is correctly dispensed and
thoroughly removed from your
clothes during rinsing.
Spin Touchpad
Press this touchpad to select the spin
speed or no spin, if you want your
laundry to be spun at a speed different
from the one proposed by the washing
machine.
The speed of spin level are:
– High, about 700 rpm ;
– Mid, about 650 rpm ;
– Low, about 550 rpm.
Soak Touchpad
This option allows you to soak heavily
soiled clothes at the beginning of the
wash. To do this, press Soak touchpad to
select the soak time.
The lid must be closed to allow Soak
functions to operate. The machine will
agitate for short periods. At other times,
the clothes are soaking and the machine
will be doing nothing.
Delay End Touchpad
Before you start the program, this option
makes it possible to define the end of the
washing program from minimum of 1 hour
to maximum of 20 hours.
Press the Delay End touchpad to choose
the end time as you wish. The display
shows the number of hours.
This option must be selected after
choosing the wash program, and
before pressing the "Start/Pause"
touchpad.
For example, if the program duration of
your selected program is 3.20 hours and
you define the "Delay End" time to 6
hours. This means your wash program
will finish in 6 hours. (See diagram)
: 6 hrs.
2.40 hrs.
Countdown
Pressed Start the
Start/Pause Program
After selecting Delay End time, press
Start/Pause touchpad to start the
program. Machine will then countdown
and update time on the display every
hours until it reaches the starting point of
the wash cycle.
If you wish to modify or cancel Delay End
option after starting the program, follow
the steps below:
- set the washing machine to PAUSE by
pressing "Start/Pause" touchpad;
- deselect this option by pressing
"Delay End" touchpad repeatedly till
the display shows delay time "
press the "Start/Pause" to start the
-
program.
ENGLISH 15
3.20 hrs.
Program Cycle
End of
Cycle
";