Synchronized Recording - Mitsubishi Z-20 Instruction Book

SEE NOIRE ATEN OR ERE SPREE ESET SIRCR A
HOW TO REWIND OR FAST FORWARD
Pressing the MANUAL ( <4 ) button causes the tape to be
rewound. Press the MANUAL ( Pb ) button to select the
fast forward motion of the tape. Press the STOP button at
the point you want the tape to stop. The tape will continue
to travel as far as its start or end position unless the STOP
button is pressed.
REPEAT PLAY PROCEDURE (Fig. 26)
TAPE DECK RECORDING
RECORDING
6. Press the REC button.
PAUSE button. To restart the recording, press the REC
button.
When you wish to listen the sound during recording,
move the VOLUME control to the right and adjust the
volume to the optimum level.
ONE-TOUCH RECORDING
SYNCHRONIZED RECORDING
Please refer to RECORDING", step 1 — 4.
HOW TO USE REC MUTE BUTTON
the tape as follows:
e Every time the arm is raised in the record synchro re-
cording
mode,
the tape will advance
rapidly without
recording to make the soundless section.
11
e lf a silent track longer than five seconds is desired, press
the button once more while the tape is in motion (i.e.,
while the indicator is flashing): After pressing the button,
another silent track of five seconds' duration is created
to extend the silent period. After creating a silent track
and after the tape travel has stopped
(i.e., after the indi-
cator has stopped
flashing), the unit will not operate
even
when continuing
to press this button. (A beeping
sound will be heard.)
Press after 3 — 4 seconds have
passed. Do not open the cassette holder while the REC
MUTE or REC PAUSE functions are in use. Opening the
holder and closing it again afterwards causes the REC
condition to be engaged.
To bring out the tape's characteristics to their full potential
and to ensure low-distortion, the TAPE SELECTOR is auto-
matically set as shown in the list.
S$, SA-X SPECIAL
MA-R, MA METAL
TAPE.