IMPORTANT PLEASE READ All products manufactured and supplied by AQUAECO are fit for purpose as long as they are Installed, used correctly, cleaned and receive regular maintenance in accordance with these instructions ... Remove all packaging and check the product for damage or missing parts before commencing with the installation.
Page 5
Test of Water and Tightness 1. Purpose: Flush the impurities and silt in the pipe in case of the blocking. 2. Open the protective plastic sheet and protective cover Turn on the tap and open up the supply valve rod to flush the pipe. Close the spool and test the pressure resistance and tightness to make sure there no leakage.
Page 6
All surface should be cleaned using a clean damp cloth. No abrasive Cleaning cleaning agents or materials should be used.