Jled1: Rgb Led Connector; Ez Debug Leds - MSI H270M MORTAR ARCTIC Manual

JLED1: RGB LED connector

This connector allows you to connect the 5050 RGB LED strips.
Watch the video to learn how to install 5050 RGB LED strips to RGB LED
connector.
https://youtu.be/CqNHyADzd2Q
Important
This connector supports 5050 RGB multi-color LED strips (12V/G/R/B) with the
y
maximum power rating of 3A (12V). Please keeping the LED strip shorter than 2
meters to prevent dimming.
Always turn off the power supply and unplug the power cord from the power outlet
y
before installing or removing the RGB LED strip.
Please use GAMING APP to control the extended LED strip
y

EZ Debug LEDs

These LEDs indicate the status of key components during booting process. When an
error is occurred, the corresponding LED stays lit until the problem is solved.
36
Overview of Components
1
3
1
Video Demonstration
CPU - indicates CPU is not detected or fail.
DRAM - indicates DRAM is not detected or fail.
VGA - indicates GPU is not detected or fail.
BOOT - indicates the booting device is not detected
1
+12V 2
R 4
5050 LED strip
JLED1
or fail.
G
B